Table of Contents
- Standing Seam Metal Roofing
- Do it yourself or Not
- More about the seam system
- Installing roofing felt before sheet roofing panels get installed
- Installation basics
- Is the standing seam metal roof right for you?
Standing Seam Metal Roofing
Standing seam metal roofing has developed into a contemporary architectural statement. It has been a popular option for many individuals who seek a dependable and long-lasting roof to safeguard their houses. Once a standing seam roof has been properly constructed, it has almost little need for maintenance. Standing seams, in most cases, will endure a lifetime. These roofing panels are made of various materials, including aluminum, zinc and aluminum-coated steel, zinc, and copper, and are covered with Cool roof certified colours, patterns, and styles.
Do it yourself or Not.
Installing a sheet roofing system is not a do-it-yourself job. It needs expertise and skill to install sheet metal panels on your roof, demanding specific training and knowledge that cannot be obtained by reading the instruction booklet. This kind of expertise can only be obtained by doing real roof installs and working with sheet metal for an extended period of time. I’ll discuss a few fundamental concepts below to give you a better understanding of some of the processes required in installing this system, but first, let’s attempt to grasp the locking mechanism known as the seam.
More about the seam system
When there is a connection, that specific region is elevated, forming the rib known as the seam. This holds the sheet roofing panels together and allows water to flow safely without dripping between the panels. If this is a do-it-yourself project, standard seam roofing panels may be purchased, and it is made to order and comes with complete instructions. Hidden fasteners are utilized to connect the metal panels.
Installing roofing felt before sheet roofing panels get installed.
A vapour barrier must be placed under a standing seam metal roof to keep moisture out. These are typically composed of plastic or foil sheets and are put over the structure before the metal sheet panels are fitted. This results in forming a protective lining, which will prevent the vapour from ascending to the top and rotting the building. Before installing the actual roofing system, it is essential to install this on all types of roofs. Whether it’s asphalt or metal, aside from the material’s preservation, you can also keep out severe weather conditions to some extent by putting ice and water on the roof’s eaves before installing vertical sheet metal panels for your roof.
All water-damaged planks and plywood must be replaced when the old roof is removed. The walls must be dry and clear of debris. The water and vapour barrier must next be securely nailed or stapled approximately two feet apart.
Installation basics:
To install metal roofing panels, you must secure and connect the vertical panels and have a locking mechanism on the side of the panels known as the seam. A unique locking mechanism secures standing seam metal roofing panels to the eave flashing. The vertical panels are then fastened with hidden fasteners every 12 inches in the center along the side of each panel. The hidden fasteners will enable the standing seam metal roof to expand and compress as needed.
Once the first panel is in place, the second panel is placed directly next, creating a connecting point at the seam. Along with the panel, the seam serves as a locking mechanism. Standing seam locking methods include snap-on, which, as the name implies, is placed over and snapped on top of the previous panel. On the other hand, the field-formed seam necessitates using a specific bending tool to lock the seam firmly. The snap system installs faster than the field-locked version. Keep this in mind when purchasing your system from the provider.
Is the standing seam metal roof right for you?
Vertical sheet metal panel roofing systems are becoming more popular nowadays because they are long-lasting and attractive on residential and commercial structures. They are very useful because they are fire-resistant, durable, energy-efficient, and, last but not least, ecologically friendly. If you opt to put a standing seam metal roof on your house, you may be able to receive a discount on your insurance rate.
Steel, copper, aluminum, and tin are among the materials of option. It has been done on one home where different materials of this kind were utilized. This used to be seen on the roofs of business buildings. Today, a growing number of residential houses are taking this path. You may choose from standing seam metal roofing panels 12, 17, and 19 inches wide. Suppose the contemporary style of standing seam metal roofing isn’t quite right for your house. In that case, you may choose metal shingles roofing, which works well for historical structures and provides your roof with a more traditional appearance.
