Metal Roofing Newmarket | Overview of Metal Roofing

Table Of Content:

Metal roofing systems in Newmarket are by far the most common type of commercial roofing. Metal roofs have been available in some form or another since biblical times. Still, they did not become the dominant system until around forty or fifty years ago, when new materials made metal roofing systems more affordable.

The following are the most common materials used in modern buildings:

  • Galvanized corrugated steel
  • Zinc, aluminum, and silicon-coated steel alloy
  • Standing Seam Metal is a rolled metal available in a variety of widths.
  • Metal sheets that have been painted or stone coated
  • Stainless steel — for extremely severe environments.
  • Copper – still a popular choice for commercial building spires, flashings, and gutters.
  • Aluminum – the most common modern roofing material, aluminum has a lifespan of at least 30 years, is lightweight, resistant to corrosion, and has a high level of reflection.

Metal Roofing Systems Have A Long History

Architects first utilized copper in the third century B.C., and the Romans used it to cover the Pantheon in 27 B.C. Even before copper became famous, other metals such as galvanized steel and colour-coated steel were used to create structures all across the ancient world.

Metal Roofing System Benefits And Drawbacks

Metal roofing Newmarket is exceptionally long-lasting. St. Mary’s Cathedral’s copper roof in Hildesheim, erected in 1280 A.D., still stands, as do many roofs on Renaissance-era castles. When compared to shingles, the materials are recyclable and, when colour coated, can be highly appealing.

Metal roofs are more expensive than asphalt and built-up roofs (BUR), but they are easier to clean and maintain over time. Metal roofing system manufacturers pre-coat the metal in practically any colour possible.

When the roof begins to show symptoms of ageing, metal roof coatings can help extend the life of both the roof and the building.

Metals used in roofing systems, like all metals, can rust and corrode with time, causing interference with radio and cellular reception.

Metal Roof Restoration

Whether a metal roofing system in Newmarket is brand new or has been in use for a long time, various low-cost metal roof repair alternatives are available, such as painting and metal roof coatings.

Building owners and facility managers should inspect and clean business roofs at least once a year.

Cleaning Methods For Metal Roofs

The most acceptable methods for cleaning metal roofs are steam cleaning and pressure washing. It is a good idea to utilize one of these treatments annually, depending on how long the roof has been in place and how much wear and tear it has taken. Cleaning increases solar resistance while also improving the aesthetic of the roof. It also increases the lifespan of the roof.

Metal Roof Coatings Increase The Lifespan Of Metal Roof Systems

The majority of metal roofs have factory-applied coatings that deteriorate over time. As the metal roof ages, it is recommended that metal roof coatings be considered to extend the roof’s life.

Waterborne acrylic, rubberized aluminum, solvent-borne styrene-ethylene butylene styrene (SBS), polyurethane, solvent-borne aluminum, and more choices are available for metal roof coatings. There are also urethane and polyurethane coatings that are stronger than other types of coatings.

Metal roofing systems are the most common alternative for covering commercial buildings since they outperform other options in terms of4 Common Metal Roof Issues durability and beauty. They are prone to rust and corrosion; thus, they must be inspected and maintained regularly. Metal roof repair and metal roof coatings extend the life of the roof, the building, and its contents.

4 Common Metal Roof Issues To Recognize And Repair Before Winter

The elegant appearance of a metal roof, combined with its longevity, makes this commercial roofing option appealing to many business owners.

Metal roofing, like any other material, can have its own set of potential concerns.  It is critical to work with an expert commercial roofing firm to avoid any metal roof problems that may arise (or, if problems are already an issue, they will address them quickly).

In either case, you’re protected.

In this piece, we’ll look at four of the most frequent metal roofing issues and how to solve or avoid them.

1. Spills

Leakage is one of the usual concerns with metal roofing (or any roofing, for that matter).

Leaks can cause structural damage to your building. And the various assets inside quickly increasing the cost of restoration if left unattended for too long.

Most leaks in a metal roof are caused by harsh weather—ice freezing and then swiftly thaws. However, leaks can also occur due to ageing or because your roof’s seam (which links many panels) was not put correctly in the first place.

Problems with your roof’s flashing (which is designed to keep moisture from leaking into your roof’s joints) could also be to blame.

Prioritize to act as soon as possible to repair this prevalent metal roof problem. Ignoring your leak makes it worse. Also, this time, do yourself a favour and hire an expert. An untrained eye may be unable to determine the trustworthy source of the leak, exacerbating an already dire situation.

2. Oil Canning or Wrinkling

Is your metal roof wavy or wrinkled in some places?

If this is the case, you are most likely dealing with an oil canning problem. Oil canning, one of the most common metal roof concerns, can occur with many metals but has nothing to do with the structural stability of the building.

The roofer who initially placed your roof may not have left enough leeway for it to expand and contract, or they may have put too much pressure on the metal during the initial coiling procedure.

To resolve the problem, you may need to replace your roof with thicker metal.

Rib rollers are a solution for reducing the possibility of oil canning when installing a new roof because the created indentations split up the amount of flat surface that is visible on the panel itself. Furthermore, selecting a lighter-coloured material with a matte finish can make any defects less visible.

3. Corrosion

Even though metal materials are more equipped to resist corrosion than many other types of roofing (metal roofs can last up to 60 years on average.), corrosion is still a possible hazard for metal roofing.

Corrosion on your metal roof may occur if the bottom was not correctly coated, causing water to become trapped between the insulation and the panel itself. Pollution will damage your roof panels over time, causing them to fail from the inside out.

Also, if you recall your Chemistry 101 lessons, some metals have harmful interactions with one another (galvanic corrosion). Furthermore, when different metals are combined, decay can occur quickly.

An experienced specialist, on the other hand, can assist you in avoiding and repairing problems by recognizing the possibility of varied metal compatibility or spot galvanic corrosion regions.

4. Roof Scuffs, Scratches, and Fading

The fourth and final issue on our list might surprise you: scuffs, scratches, and fading.

Fading occurs when the pigment in your paint breaks down due to continual interaction with UV radiation, water, or even pollution. Fading affects the colour of your roof, frequently in an inconsistent manner, and can occur regardless of where your structure is located.

But don’t give up hope. The good news is that, due to the prevalence of this problem, most roofing manufacturers provide some warranty to assist cover any premature fading.

Scuffs and scratches can occur for various causes, including an unskilled roofer failing to utilize edge guards or dropping a tool, as well as the metal being poorly coiled (which is why working with an experienced roofing professional is a must).

Need Assistance With Metal Roof Issues?

We hope this has helped you learn about the most prevalent metal roof difficulties and the causes of those problems.

Consulting with a roofing specialist who can assist you in making the best option for your roofing material is a wise decision. If you already have metal roof problems, don’t try to fix them yourself. It is dangerous for unskilled folks and may wind up causing further damage to your roof.
Here at Jay Carter Roofing & Sheet Metal, we have vast experience with metal roofing in Barrie. Contact us today for an estimate!